Bereavement Centre, Mary Ann Evans Hospice, Nuneaton
SwiftClad designed and installed a Sika Trocal single ply membrane roofing system to the flat roofs for the new Mary Ann Evans Bereavement Centre.
We installed an Ash and Lacy Ashwall SFS framework system to the complete building façade, which was then cladded with Cement Particle boarding and Kingspan’s K15 Kooltherm rainscreen insulation.
The final façade treatment was to install Western Red Cedar 5X blue label untreated shingles to the walls and to the pitched roof.
House by the Water, Shiplake, Henley on Thames
SwiftClad installed a Protan single ply roof membrane finish to a concave timber panelled roof construction on a newly constructed house alongside the river Thames.
Integral Protan metal gutters were constructed within the building fabric to avoid external gutters.
Tiles International supplied Creaton Tonality Classic terracotta tiles, manufactured in Germany, and these were installed on supporting bracket rails to the external façade as a Rainscreen system. Careful detailing ensured that the tiles were levelled around the buiding absorbing any tolerance issues with the framework.Marley Eternit Natura cladding boards were installed to the exposed soffits, framed with powder coated aluminium flashings
Engineering Building, Leek College
SwiftClad designed and installed a Rigidal Ziplok aluminium standing seam roof with a zinc finish, fixed on corogrid carriers and brackets with mineral fibre insulation, all to the new timber panelled Engineering Building for Leek College.
Powder coated aluminium cappings were installed to all of the parapets.
A Western Red Cedar rainscreen panel was installed to the front elevation.
Canopy Extension, BMW , Hams Hall, Coleshill
SwiftClad installed a Sika Trocal single ply membrane roofing system, insulation and a Tata D35-900 galvanized steel decking sheet onto the steel frame canopy extension.
SwiftClad installed Tata Prisma silver C32-1000 single skin cladding sheets to the exposed wall elevations of the extended steel frame building, along with powder coated aluminium parapet and opening flashings.
Retail Units, Malvern Retail Park, Worcestershire
SwiftClad designed and installed Kingspan KS1000 Topdek composite roof panels with Trocal single ply membrane finish to the new single storey retail unit development.
Kingspan’s KS600 Optimo composite smooth faced wall panels were installed to the walls along with powder coated aluminium parapet cappings and soffit cladding.
Replacement Entrance Canopies, Gallagher Retail Park, Coventry
SwiftClad installed new roof cladding and powder coated aluminium fascia cappings with bird wire deterent to the new steel framed canopy structures.
Powder coated aluminium cladding panels, with bonded plywood backing, were installed to the canopy façades.
Recladding the Entrance Façade, Pets at Home, Mendalgief Retail Park, Newport
SwiftClad removed the existing composite cladding panels and parapet cappings from the front elevation.
We then installed new carrier rails to the existing steel framework, and installed Tata’s Trimapanels composite cladding panels with Prisma finish with new parapet cappings.
All of the work was undertaken whilst the store remained in use by the general public.
Early Years Centre, Checketts Lane, Worcester
SwiftClad designed and installed a prefabricated curved steel roof truss system over the existing flat roof of the children’s nursery.
We then installed Rigidal Ziplok precurved stucco finished aluminium standing seam roof panels onto the roof trusses to create a striking new barrel vaulted roof.
Powder coated aluminium fascias, gutters and soffits were installed to complete the design.
New House, McIntyre Road, Worcester
The Client designed and constructed a new highly insulated timber frame and panelled house. SwiftClad were requested to design, develop and install Cor-ten 1.5mm steel wall and roof panels as a rainscreen system onto this structure.
SwiftClad designed and detailed all of the panels individually which were then manufactured at our local fabricators.
The Cor-ten roof panels were installed on a metal carrier system which was fixed via non penetrative seam clips to a metal standing seam roof laid on top of the timber frame roof panels, thus ensuring a watertight surface below the rainscreen.
The wall panels were fixed to a carrier system mounted on the timber frame, with Kingspan K15 Kooltherm rainscreen insulation fixed between the carriers.
A Protan single ply roof membrane was installed onto the new flat roofs.